High Quality Armored Wrap Tape for Industry Pipe Repair and Cable Connection

Pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water activated polyurethane resin.

Our pipe repair bandage uses environmental friendly materials, and mainly used for Repair Oil , Gas & Water Pipeline etc,and adheres to Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, ect.

Application:

1. Once the leaking area is identified, shut down relevant pipes or hoses immediately. 
2. Prepare the surface by cleaning and roughening the pipe.
3. Put on enclosed latex gloves. 
4. Apply Steel Putty to the leak site and mould. 
5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds.The entire contents must be used once the package is opened.6. Apply around the damaged area extending up to 50mm either side of the leak to ensure complete coverage.It is important that the bandage is applied.
7. quickly as curing begins once it is taken out of the water.
8. Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together. Continue this action during and upon completion. 

For best results, manufacturers recommend the completed application should be no less than 10mm in thickness. Please refer to the instructions for use on each bandage for a troubleshooting guide.


Package: ​     OEM service is available



About us:​
Ansen medical is the manufacturer with 13 years experience specializing in fiberglass pipe repair bandage ,emergency pipe repair bandage.......